Click here to view the Medicator Rx MSDS.

Medicator Rx Directions for Use Between Medicating and Vaccinating Cycles:

1. Inject clean water to rinse chemicals from medicator
2. Dissolve one packet into 1/2 quart (16 ozs) of water
3. Place strainer in solution
4. Turn water on and watch suction hose fill with green liquid
5. Once green liquid has filled the hose to the top, allow medicator to click 5 more times
6. Shut water off
7. Let solution sit in medicator for up to 24 hours
8. Inject clean water to thoroughly rinse medicator

For Deep Cleaning, Dismantle and Soak Medicator Parts:

1. Prior to soaking in the Medicator Rx solution, dismantle medicator and thoroughly rinse all parts in clean water to remove chemicals
2. Dissolve one packet into one gallon (4 qts) of water
3. Soak medicator parts in Medicator Rx solution. For best results use one packet of Medicator Rx per medicator and soak for 24 hours, up to 48 hours. Larger medicators use two packets to two gallons of water
4. Remove medicator parts from soaking solution
5. Thoroughly rinse all parts with clean water to be sure solution residue is removed prior to reassembly

For optimum performance use Medicator Rx frequently.

Medicator Rx must be used as directed. Do not use when animals or children are present. Seller’s not responsible for damage, loss or injury of any kind, including without limiting lost profits. Expressed or implied warranties are disclaimed.

Manufactured by: